Open Forum

W620 Wascomat Washer problem

  • 1.  W620 Wascomat Washer problem

    Posted 30 days ago
    Dear All,
    I have W620 wasomat washer sr # 005200077609.
    Washer is working fine until cycle done but only you can open the door lock after 4 or 5 minute after cycle done. any suggestions.
    Thanks in advance
    Prabhu Ughareja
    Maytag - Sponsored Webinar September 17, 2019


  • 2.  RE: W620 Wascomat Washer problem

    Posted 30 days ago
    Clean out your level control hose and the "banana tube"

    ------------------------------
    Richard H.
    Potential Divestor
    B.C. Canada
    ------------------------------

    Maytag - Sponsored Webinar September 17, 2019


  • 3.  RE: W620 Wascomat Washer problem

    Posted 23 days ago
    Dear All
    I installed the rebuild timer and I will check water level tube. Thanks for your help.



    Maytag - Sponsored Webinar September 17, 2019


  • 4.  RE: W620 Wascomat Washer problem

    Posted 29 days ago
    If you have another machine, I'd swap the timer first, then door lock.  I lean a little more toward it being a timer based on my experience with the Gen 6's.  They are at the age where the contacts inside the timer wear down and need to be cleaned/replaced.  There are a number of reputable places that refurbish timers.  Try cleaning the pressure tube first as Richard suggested, that's an easy, 5-10 minute task,  Swapping timers is a little more involved, but my money is on that.   Good luck.

    ------------------------------
    Paul Kludt
    Multi Store Owner
    Lake Worth Coin Laundry
    West Palm Beach, FL
    ------------------------------

    Maytag - Sponsored Webinar September 17, 2019