Open Forum

Huebsch Dryer Problem

  • 1.  Huebsch Dryer Problem

    Posted 08-12-2019 14:30
    Dear All,
    I have a Huebsch stack Dryers Model # JTO300DFG, Sr # DTCK9803050749.
    Dryers some time does not start Igniting( No Fire). Only star fire after couple of time resetting. I don't know  the real problem. thanks in advance.

    Regards,
    Prabhu Ughareja
    Join CLA - Enjoy Membership Benefits


  • 2.  RE: Huebsch Dryer Problem

    Posted 08-12-2019 23:15
    Prabhu,  typically it is either bad gas valve coil (s) or the IEI control (igniter). Either replace them both or to test with dryer running lift the sail switch and release. If you hear a clicking sound, but it doesn't light, change the gv coils. If no clicking sound, change the ign. control. If it lights for a moment and goes out, change the ign. control. Hope this helps.
    Tom

    ------------------------------
    Thomas Bright
    Owner
    Bright's Coin Wash
    Marengo Illinois
    ------------------------------

    Join CLA - Enjoy Membership Benefits


  • 3.  RE: Huebsch Dryer Problem

    Posted 08-13-2019 11:21
    Dear Thomas
    Thanks for your help. I will do that.

    ------------------------------
    Prabhu Ughareja
    Naklank Corp
    Edison NJ
    ------------------------------

    Join CLA - Enjoy Membership Benefits


  • 4.  RE: Huebsch Dryer Problem

    Posted 08-13-2019 22:35
    Thomas brings up the most common fixes to the issue you mention. However, if you find none of these actions fix the issue, you could have a problem with the computer. You can test this by switching the problem dryer computer with a working dryer. When I have a computer problem, I have my rebuild by mountain electronics.

    ------------------------------
    RAY BENOIST
    OWNER
    LOVELY LAUNDRY
    Toms River NJ
    ------------------------------

    Join CLA - Enjoy Membership Benefits


  • 5.  RE: Huebsch Dryer Problem

    Posted 08-16-2019 10:57
    I just want to mention that I have had a problem with one of my JTO350 dryers and because replacing the usual components didn't solve the problem, I ordered a new gas valve complete. It's a rare occurrence to have an entire gas valve go bad, but the dryer is now working again as normal.

    There are 2 kinds of gas valves for this model and the newest one for todays model. all three will work, but be sure to order it by the machine serial number to get the original valve. That way you can easily replace it without using any additional hardware.

    Tom

    ------------------------------
    Thomas Bright
    Owner
    Bright's Coin Wash
    Marengo Illinois
    ------------------------------

    Join CLA - Enjoy Membership Benefits


  • 6.  RE: Huebsch Dryer Problem

    Posted 08-16-2019 14:36
    Hi Thomas,
    I replace the gas coil and working fine. Thanks for your help



    Join CLA - Enjoy Membership Benefits


  • 7.  RE: Huebsch Dryer Problem

    Posted 08-18-2019 00:18
    Prabhu, I'm very glad you got your dryer running again. Now you have a good idea of how to fix the next one .

    Tom

    ------------------------------
    Thomas Bright
    Owner
    Bright's Coin Wash
    Marengo Illinois
    ------------------------------

    Join CLA - Enjoy Membership Benefits