My Contributions

Contact Details

Jenkins, KY

JAMES STALLARD

Wise Coin Laundry


Ribbons
Professional Member
Silver Most Valuable User

JAMES STALLARD

Wise Coin Laundry

Discussion Posts

  • RE: Dryer manifold

    Posted in: Open Forum
  • Dryer manifold

    Posted in: Open Forum
  • Posted in: Classifieds
  • Posted in: Classifieds
  • Posted in: Classifieds

My Content

1 to 11 of 11 total
Posted By JAMES STALLARD Jan 29, 2019 4:11 PM
Found In Egroup: Open Forum
\ view thread
You are correct Mr. Larsen. I did not utilize a distributor for installation and don't have an architect. My contractor is more of a general contractor, he did however do the work on the first laundromat. So I would say the position I'm at with this current project is not about bad advise but more learning ...
Posted By JAMES STALLARD Jan 25, 2019 3:15 PM
Found In Egroup: Open Forum
\ view thread
I am in the process of opening my second laundromat and have run into an issue. My first laundromat all the dryer are along one wall that opened to outside so we vented each dryer individually. This second one in in a strip mall and I have other businesses on each side of me. So my only option is to ...
Posted By JAMES STALLARD Jan 2, 2019 4:20 PM
Found In Egroup: Classifieds
\ view thread
Is this still available? If so could I get a pic? Thanks ------------------------------ James Stallard Store Owner/ Employee Wise Coin Laundry Jenkins KY ------------------------------
Posted By JAMES STALLARD Dec 10, 2018 4:05 PM
Found In Egroup: Classifieds
\ view thread
Are any of the toploaders still available. ------------------------------ James Stallard Store Owner/ Employee Wise Coin Laundry Jenkins KY ------------------------------
Posted By JAMES STALLARD Dec 10, 2018 3:54 PM
Found In Egroup: Classifieds
\ view thread
I am looking for good condition used toploaders thank you. I need 10-14 of them and age is not really a concern as long as parts available. I would prefer ge, Maytag or any alliance product. Just no whirlpool. I live in jenkins ky 41537 and could pick up within about 200 mile radius from there. Any farther ...
Posted By JAMES STALLARD Nov 9, 2018 1:08 PM
Found In Egroup: Open Forum
\ view thread
I bought a national crane 146 or 148 snack machine used for $250 runs perfect. My plan was to use it to dispense my boxes of tide, snuggle etc. but I also wanted it to vend the 10oz. bottles of liquid detergent. I discovered the spiral arms that turn to release the selected items were slightly to narrow ...
Posted By JAMES STALLARD Oct 26, 2018 6:29 PM
Found In Egroup: Open Forum
\ view thread
Behind my building is a 2 inch supply line. The water supervisor says for a very minimal cost they will remove the 3/4 inch meter and replace it with a 1 inch. Since I have to plumb the whole building anyway would that solve my problem if I had them do that and I ran one inch line throught the whole ...
Posted By JAMES STALLARD Oct 26, 2018 6:02 PM
Found In Egroup: Open Forum
\ view thread
And just FYI I'm still laughing about a water heater doesn't use water it heats it.😂😂😂 see what happens when a pharmacist tries to put a laundromat in. ------------------------------ Craig Stallard Store Owner/ Employee Jenkins KY ------------------------------
Posted By JAMES STALLARD Oct 26, 2018 3:48 PM
Found In Egroup: Open Forum
\ view thread
line coming in is 3/4 inch static pressure 85 pounds. Water supervisor says 22 GPM is what is provided. Can I run 6-30 pounders 3-40, and 3-60 plus 8-10 top loaders. And water heater is rinnai tankless RL-94i. Thanks for your help ------------------------------ Craig Stallard Store Owner/ Employee Jenkins ...
Posted By JAMES STALLARD Oct 26, 2018 3:15 PM
Found In Egroup: Open Forum
\ view thread
Thanks for your help. Not sure who posted be careful how I answer town planner but they were correct. The 110 GPM has freaked them out. Water supervisor is supposed to call me back with size and pressure of line into my building, but as of now they will not even let me have the water turned on. ---- ...
Posted By JAMES STALLARD Oct 25, 2018 8:53 AM
Found In Egroup: Open Forum
\ view thread
I have leased a building and will be opening my second laundromat. This one is in another town and the town planner is asking for my peak flow before they will turn on the water. Says they need to make sure they can provide enough volume to support all washers if they were to be turned on all at once. ...